Magnetic Wet/Dry-Erase Blackboard (Chalkboard) for Fridge – Size 17.5″ x 13.5″

WHAT’S INSIDE THE PACKAGE?

• Flat colorful package (x1)
• 17.5″ x 13.5″ Magnetic blackboard (x1)
• Full set of blackboard magnetic markers (liquid Chalk – fluorescent) (x8)
• User instructions (x1)

8 LIQUID CHACK MARKERS – While other blackboards include only 0-4 colored markers, you will get 8 multicolor magnetic markers (white, red, blue, green, purple, yellow, orange and pink). This will allow you greater versatility:

• Kids love drawing and writing on blackboards – especially when it comes with full range of color markers.
• Use a different color for different purposes – lists, tasks/chores etc. – each one can have its own color!

ACTIVATE THE MARKERS –

• Step 1: Shake – Make sure the marker’s head is properly screwed on and that the cap is properly closed and then shake the marker for 30 seconds.
• Step 2: Pump – Remove the cap and hold the marker vertically. Place the tip onto the paper towel or napkin. Press down and release the tip repeatedly, until it fills with ink. Hold down each pump, for a second or two before releasing. Once the color saturates the tip completely – you are ready to write on the board, but it might take about 30 pumps for the ink to flow out.
• TROUBLESHOOTING 1: If the ink does not flow out after 30 pumps / one minute of pumps – and you see the tip is still dry – don’t worry!
  • Close the cap and shake it again (repeat the steps until it is ready for usage).
  • You can also pull the tip out, wet it with some water and place it back upsidedown. It will help the ink to flow during the shake & pump steps.
    
• TROUBLESHOOTING 2: If during future usage, the tip starts drying up and there is not enough ink in your writing, repeat the steps above to saturate the tip.

ERASING THE BOARD –

• For erasing small parts or making small corrections, start with a dry cloth/paper towel. If you find it a bit difficult, you can use a second wet one – water removes the ink immediately!
• For erasing the board completely, you will find it easier to take it off the fridge and place it on a flat surface like your kitchen table/counter. Use both a wet clothpaper towel and a dry one to properly clean the board.

STAIN RESISTANT TECHNOLOGY!

Our board has 3 high-quality layers which are different than other boards:

1. FIRST LAYER (LAMINATION LAYER) – Most boards use PP film which is a cheap lamination – this causes staining, ghosting and marking which ruins the board. Hmmagnets’ layer is made of a special film lamination (transparent PET) which makes the surface durable for constant, repeated erasing that will leave your board new and GLOSSY – NO staining, NO ghosting and NO remnant markings.
2. SECOND LAYER (BLACK LAYER) – Most boards use cheap regular paper for this layer. This causes the layers not to adhere to each other which is the reason for peeling corners, worn off edges & bubbles. Hmmagnets’ layer is solid unique PVC, which gives your board a pure black look. Ours is the ONLY one available that completely prevents peeling corners, worn off edges and bubbles.
3. THIRD LAYER (MAGNETIC LAYER) – Our bottom layer is a thick (0.5mm) rubber magnet which makes it more magnetic and less flimsy than other boards! Stick it to any magnetic metal surface – fridges, lockers, dishwashers and more – without the worry of it falling off.

Click to view the product instructions here.