17″ Tool Holder (Wall)
$29.95 $24.95
17″ Heavy-Duty Magnetic Tool Holder (Upgraded Version) – Extremely Powerful Magnetic Pull Force to Hold Heavy Tools – Professional Space-Saving Magnetic Tool Bar – Metal Tool Organizer Rack/Strip
Other versions available:
In stock
Here’s What You’ll Receive:
- One 17″ magnetic bar (Dimensions are 17 x 1.6 x 1″)
- 2 Screws (4.8 X 50 mm) + spare set
- 2 Screw anchors (8 X 40 mm) + spare set
- Detailed instructions
Click to view the product instructions here.
No. It only comes in black. You can attach any tool you would like, as long as it's magnetic and has enough flat surface to be in contact with the bar. Here is a list of tools that work perfectly: hammers, pliers, wrenches, wire cutters, screwdrivers, tape measures, axes, saws, files, Allen keys and ANY other tools you may have. Never lose a tool again! Any electric tool, like a drill, are not recommended. Any simple tool will work fine as long as it has enough flat surface in contact with the bar. Yes. It includes instructions, 4 screws and 4 anchors. You can watch the installation video in the 'Product Video' tab for more information. Yes. However it is not recommended as the safest way to place tools are when they are facing downwards. Yes. The space is 1 inch (2.5 cm). We have tested many tools and we managed to place and remove each one with ease You can place your magnetic tool holder in many places: Yes. You have 2 options: The distance between the center of both holes is 12" (30.48CM) 2.49 pounds (1.13KG) 8mm drill bit. We recommend starting with a 7mm one and work your way up. It can hold up to 10-12 tools depending on their sizes. Inches - 17 (L) x 0.6 (W)(Excluding the 1" mounting handles) x 1 (H) Yes, we have a 24" version. We recommend mounting the tool holder by drilling into your wall as it's the safest way. If you decide to place it on a metal surface, place the backside on that surface because the mounting parts might be in the way which will prevent the bar from being entirely in contact with the surface. You can, however the strength of the bar might be too powerful. This will cause you to use a lot of force pulling off your knives which will ultimately damage them. No. The tool holder has an equal magnetic pull force across the entire bar. That depends on the tool. The more area it has that can be in direct contact with the bar, the higher chances the bar will be able to hold it. For example, the tool holder manages to easily hold a 4.4lb hammer. The bar is made of iron and ferrite magnets. Feritte magnets. The package includes a magnetic tool holder, instructions and 4 screws + 4 anchors The bar is an all-in-one piece and should not be separated. Does it come in other colors besides black?
What tools can be attached to the bar?
What tools are not recommended to place on the bar?
Does it include instructions and mounting hardware?
Can I mount the tool holder vertically?
Is there enough space between the tool and the wall to easily place and remove them?
Where Can I mount the magnetic tool holder?
How do you hang the magnetic tool strip?
Can I mount a magnetic tool bar without drilling?
How far apart are the mounting screws?
How heavy is the tool holder?
What size drill bit should I use?
How many tools can it hold?
What are the dimension of the bar?
Centimeters - 43.18 (L) x 1.5 (W)(Excluding the 2.5cm mounting handles) x 2.5 (H) Do you have this in smaller/longer size too?
Can this be mounted on metal by the magnet without screws?
Can I use it for kitchen knives or would magnet be too strong?
Does this strip have a dead spot in the middle?
How much weight will it hold?
What is the bar made of?
What types of magnets are used in the magnetic tool holder?
What's included in the package?
Is the knife holder made of two parts or one?
Additional information
Weight | 2.25 lbs |
---|---|
Dimensions | 17 × 1.6 × 1 in |
Material | Iron + Ferrite magnets. Magnets may interfere with the operation of pacemakers. Keep a distance of at least 6 inches from the magnet bar. |
Category | Magnetic tool holders |
We're happy to hear the bar is strong and working well!
We're also sorry for the defects!
Please contact us directly and we'll make it right for you :)
HMmagnets