Sale!

Magnetic Knife Holder for Wall – Stainless Steel – Size 17″

(1358 customer reviews)

$29.95

In stock

LIMITED OFFER!
BUY 2 PRODUCTS → GET 10% OFF
BUY 3 PRODUCTS → GET 12% OFF (Any combination of our store products)

*Our 17″ premium stainless steel magnetic knife holder is for wall mounting. For our fridge knife holder (double-sided version) – Click here!

17 INCH TOP-NOTCH QUALITY STAINLESS STEEL (TYPE 304) – There are many magnetic knife strips out there using type 201. Well, that’s not good enough for our magnetic rack! We insisted on type “304.” This type is much more durable with regards to corrosion, and will last a life time. It may be more expensive, but it’s actually cheaper in the long run, as you won’t have to replace your knife strip every few years. It’s also 1 inch longer than your typical magnetic knife holder.

HEAVY-DUTY MAGNETS WITH POWERFUL MAGNETIC PULL FORCE – Our magnetic knife holder is *NEW & UPGRADED* with *HEAVY-DUTY MAGNETS* which last a lifetime! The entire bar is magnetized (from edge to edge) allowing for an even flow of magnetic power that will hold all your knives securely. You need not worry though, with just a gentle pull, your knife of choice will be released! *NOTE THAT IT IS NOT MAGNETIZED ON THE BACK, AND DOES NOT ATTACH TO THE FRIDGE*

KEEPS ANY TYPE OF KNIFE SECURE – No matter what type of knife you have, from Chef’s knives to Butcher’s knives, Bread knives and Paring knives, this professional magnetic strip is designed to hold the lightest of knives to the heaviest off knives with ease!

ALLOWS FOR MORE COUNTER SPACE & ORGANIZED DRAWERS! – Get rid of bulky knife blocks that take up way too much space on your kitchen counter, and eliminate the hassle of spending too much time finding the correct knife in unorganized drawers. The HMmagnets magnetic knife strip helps cut cooking preparation in half because whatever you need, you can just grab. It also allows for a much safer kitchen!

MODERN & ELEGANTLY DESIGNED – Our 17-inch magnetic knife bar is elegantly designed in a way that doesn’t expose mounting screws or magnets. It is designed to give a “floating” appearance and is silver in color to fit into *ANY KITCHEN*. It gives a touch of elegance to any home, and *INSTALLATION IS SIMPLE AND FAST*, allowing for knife storage that is, and appears, organized and stylish!

Other versions available:

1. 17″ fridge applicable stainless steel magnetic knife holder (double-sided for fridge)
2. 10″ stainless steel magnetic knife holder (for wall)
3. 24″ stainless steel magnetic knife holder (for wall)

SKU: BE-C8BE-ZZEW Category:

1358 reviews for Magnetic Knife Holder for Wall – Stainless Steel – Size 17″

    Erika
    August 8, 2021
    Once it's up it's great
    The magnet is strong but it is difficult to hang
    Helpful?
    0 0
    ANITA PRUIETT
    July 20, 2021
    Very heavy..! Difficult to install...!!!
    Very heavy...! Please take into account that this bar is heavy if you don't have stury walls or 2ֳ—4's that are perfectly 16 inches apart this will be...More
    Very heavy...! Please take into account that this bar is heavy if you don't have stury walls or 2ֳ—4's that are perfectly 16 inches apart this will be very difficult to hang...! Aside from that the bar is great, magnet is powerful & it looks very sleek & modern...! Does what it says...!!!
    Helpful?
    0 0
    Amazon Customer
    February 16, 2021
    Very heavy for normal installation
    Although the product was excellent, it’s weight was not indicated. In its description .. therefore it weighed significantly more than an adhesive woul...More
    Although the product was excellent, it’s weight was not indicated. In its description .. therefore it weighed significantly more than an adhesive would hold on my ceramic tiles. Was at least 10 lbs!! That info should be listed under ‘info’
    Helpful?
    0 0
    Amazon Customer
    February 12, 2021
    Return & shipping cost
    This product is amazing, just won’t work in my kitchen. Just an FYI if you need to return this, the lowest shipping charges are more than half of what...More
    This product is amazing, just won’t work in my kitchen. Just an FYI if you need to return this, the lowest shipping charges are more than half of what the product is worth and at the lowest shipping rate it can take over a month (from Canada).
    Helpful?
    1 0
    Amazon Customer
    January 7, 2021
    O
    Satisfied with the product
    Helpful?
    0 0
    Amy S.
    November 21, 2020
    Not that easy to install
    The drywall anchors provided were ineffective making for a difficult installation
    Helpful?
    0 0
    Juan
    July 28, 2020
    Needs stronger anchors
    The original anchors that come with it aren't strong enough. I bought some stronger ones but haven't installed them yet. MAybe even anchoring it to st...More
    The original anchors that come with it aren't strong enough. I bought some stronger ones but haven't installed them yet. MAybe even anchoring it to studs would work better.
    Helpful?
    0 0
    Panther Heru
    July 24, 2020
    If you're not drilling it in it's hard to install
    I don't want to drill holes in my wall so I tried 3M tape like one reviewer suggested, and it won't stay up on my fridge or wall.
    Reply from HMmagnets:
    Hi,

    We're sorry you had a hard time installing our magnet bar.
    It's important to note that we never claimed that the bar should be mounted by applying 3M tape. The only recommended way to install the bar is by drilling.
    That being said, here are some tips if you do decide to use tape:
    Make sure you cover the entire back side of the bar (vertically) and that you choose very strong double sided tape.

    HMmagnets
    Helpful?
    0 0
    Brad Hurn
    April 1, 2020
    Works well
    Magnet is SUPER strong. Holds 5-7 knives easily with no worry of dropping them. I feel maybe the mounting system could be improved. The holder just sl...More
    Magnet is SUPER strong. Holds 5-7 knives easily with no worry of dropping them. I feel maybe the mounting system could be improved. The holder just slides on 2 screws and that makes it a bit wobbly when removing a knife.
    Helpful?
    0 0
    PBS1
    January 3, 2020
    Here's what you really need to know
    I purchased this bar to hold a collection of larger Wusthof Classic knives. Here is what I found: the magnetic bar will only hold them firmly if you...More
    I purchased this bar to hold a collection of larger Wusthof Classic knives. Here is what I found: the magnetic bar will only hold them firmly if you attach the knife tips pointing upwards as shown in the seller's photos. I cannot do this for safety reasons given where I want to mount the bar. If you attach them pointing downwards with any gap between the bar and the knife handle, they will slide down and sideways on the bar, sometimes falling off, also a safety issue. I returned the bar immediately to Amazon for a refund.
    Reply from HMmagnets:
    Hello,

    We are sorry to hear our magnet bar did not meet your expectations.
    As you said, the proper way to attach the knives is by placing them so that the knife tips are pointing upwards.
    Any other way is not safe and not recommended. When you place your knives upside down like you did, the weight of the handle causes the knife to move/slide.
    Our knife bar is the strongest one available on Amazon - this was tested many times and 98% positive reviews prove this.

    HMmagnets
    Helpful?
    0 0
    Kalla
    March 6, 2019
    It's ok ish
    Not as strong as I was hoping!
    Reply from HMmagnets:
    Hi Kalla,

    We're sorry to hear that. It is a fact that our magnetic knife holder is the most powerful one on Amazon and can easily hold any type of knife. This was tested many times and was verified by hundreds of customers.
    Please contact us as soon as possible and we will sort this out to your satisfaction - we will be more than happy to help you :)
    Helpful?
    0 0
    Michelle Lord
    January 26, 2019
    Magnetic knife strip....had instructions, but no screws or screw anchors
    I received this with no hardware. I’ll review it after I buy the supplies that we’re supposed to be included.
    Reply from HMmagnets:
    Hi Michelle,

    We're very sorry to hear about that!
    Amazon is fully responsible for shipments and sometimes they send customers used products (which were previously returned) that they believe are in a good enough condition. This is usually the reason why there are some missing parts. Unfortunately, we do not have control over this process.
    Please contact us and we'll take care of this asap.

    HMmagnets
    Helpful?
    0 0
    Nemi
    January 23, 2019
    Wobbles on the wall
    The thing wobbles and doesn’t hold tight to the wall. When you put on or take off the knife, you feel like you’ll take the whole thing with you. Not s...More
    The thing wobbles and doesn’t hold tight to the wall. When you put on or take off the knife, you feel like you’ll take the whole thing with you. Not sure how to get It to not wobble and fit snuggly to the wall. We will keep It for now since we like the length and the extra counter space
    Reply from HMmagnets:
    Hi Nemi,

    This problem happens to customer every now and then and it can be easily solved:
    In order for the bar to not wiggle, you have to make sure the anchors are flush against the wall and that only the screw heads are out. You can try screwing the screws a little deeper and attach the bar again and vice versa, until it's seated securely.

    HMmagnets
    Helpful?
    0 0
    Darrick N.
    December 31, 2018
    Magnet works like a magnet.
    Hopefully they update the design and or come with better dry wall anchors, if you aren’t going straight into studs go ahead and buy better anchors the...More
    Hopefully they update the design and or come with better dry wall anchors, if you aren’t going straight into studs go ahead and buy better anchors the ones provided are garbage. Other then that for the price it does the job just as good as one of the more decorative wooden ones. Would give better rating if items provided for install would have been better as well as customer care. Prior to writing review I reached out and basically got told ohh well on install items.
    Helpful?
    1 0
    nathan
    September 25, 2018
    Not as good as i was expecting
    Over all its not bad but there are a couple spots where a only 7.5 oz. blade does wiggle.It comes with a template for where you should put the screws...More
    Over all its not bad but there are a couple spots where a only 7.5 oz. blade does wiggle.It comes with a template for where you should put the screws in and the necessary hardware to complete the task.I was hoping for better.
    Reply from HMmagnets:
    Hi Nathan,

    We're sorry to hear you had a bad experience with the knife bar.
    Our magnet knife bar easily holds 20 oz. (1.2lbs) knives (as seen in the photos).
    Please feel free to contact us for further assistance.

    HMmagnets
    Helpful?
    0 0
    Amazon Customer
    August 8, 2018
    Needlessly heavy and cumbersome
    This is one of three magnetic knife holders that I own. It is my least favorite. I would have returned it, but I had a family emergency and it was t...More
    This is one of three magnetic knife holders that I own. It is my least favorite. I would have returned it, but I had a family emergency and it was too late to return it when I returned home. I find that it's much heavier than it needs to be. My other light weight holders do a very good job at holding my heavy knives. Even though this design is a wide surface, my knives seemed to slide on it. I don't have that problem with my other holders that have two thin magnet bars spread apart. I gave this one to my husband to use in the garage for his tools. I'm sure it will work fine for that purpose. I don't typically give negative reviews, but since I have had much better luck with other designs (that were not as pricey), I thought it was worth mentioning.UPDATE: After my review, I was contacted by the seller and offered a full refund. I was not asked to change my review, but felt this was worth posting. In this day and age, it's not often that you find a company who shows concern for the customer and who whole heartedly believes in their product. I find it refreshing that in spite of my review, they wanted to ensure I was happy. So for those of you who like this design and the long length of this magnetic knife holder, this may work for you. And if not, it's nice to know the company is honorable and stands behind their product.
    Helpful?
    1 0
    Linda M.
    June 1, 2018
    Three Stars
    Was supposed to come with mounting hardware
    Reply from HMmagnets:
    Hi Linda,
    There was a problem with the shipment. We have sent you a new one which arrived with the mounting hardware.
    Thank you :)
    Helpful?
    0 0
    joseph c.
    May 19, 2018
    Have two set of screw holes on the back. Four total. one up one down so it wont pull away from wall. Thanks
    The bottom of the knife holder from the back pulls away from the wall. Makes me feel uneasy, so I bought some double sided Gorrila Tape to put on the...More
    The bottom of the knife holder from the back pulls away from the wall. Makes me feel uneasy, so I bought some double sided Gorrila Tape to put on the back as well. (tape is expensive). I have not yet put the tape on yet. I do like that the magnet is srong but not to strong.
    Reply from HMmagnets:
    Hi Joseph,

    I don't think I quite understand what's wrong. You wrote there are 4 holes on the back, however, there are only 2. If you follow the instructions and leave the screws so only the heads are out, the bar will be mounted so strong that it will never move, I promise :)
    Maybe you can explain a bit further what was the issue? I might be able to help you solve it. Please contact us at info@homemagnets.com
    Helpful?
    0 0
    msn
    April 25, 2018
    Three Stars
    I purchased these as a gift for my daughter; when she installs it, will be able to review honestly.
    Reply from HMmagnets:
    Hi there, thank you for your comment, but it seems you gave us 3/5 star rating by mistake.
    We hope it is not her real experience with the knife bar :)
    Helpful?
    0 0
    Eli Mac
    March 26, 2018
    Frustrating mount system and sharp edges
    The primary reason for the three star rating on this product is the archaic way it hangs on the wall with two key hole cut outs that have to slide ove...More
    The primary reason for the three star rating on this product is the archaic way it hangs on the wall with two key hole cut outs that have to slide over the included screws and molly bolts. Any item using this method can be a challenge to measure and level accurately. The product comes with a template which I appreciated. The problem with it was that the template was off ever so slightly from the measurements of the key holes. Even after several careful measurements both on the product and the wall, my placement ended up being off. I did get it but even when mounted the bottom lifts up when a knife is pulled from the magnet. I do not expect it to remain tight, even with the molly bolts in the drywall. If you do choose to buy this product for a flush mount against the wall I highly recommend the purchase of a 3M or Gorilla Glue type fastening system to save both your sanity and your wall. The other important caution I feel is worth mentioning is that the back of the product does not have a finished edge and it is very sharp. I ended up with several deep cuts in my hand from the edge digging in while I was trying to catch the keyholes. The sharp edges also marked up my wall. I have blood, sweat and profanities invested in this thing now so it wasn't worth taking down to return.** as an update the seller voluntarily offered a refund. This company does make good effort to stay in contact with customers and ensure they are satisfied with their purchase. I did end up taking the magnet down and reinforcing it with wall safe tacky paste and that has helped.
    Helpful?
    1 0
    Amazon Customer
    February 26, 2018
    wish i had known it would not work
    wanted it to attach to the frig so had to order another one
    Reply from HMmagnets:
    Hi, I'm very sorry for the inconvenience this may have caused you!
    It's important to note that under our 'product description' we clearly state: "The bar does not have back-sided magnetic pull force so it is not meant to be magnetized to a fridge".
    It is also stated under customer questions & answers.

    We are currently working on a fridge version which will be as powerful as our current magnetic knife bar (probably the strongest on the market).
    Also, to make you feel better you are welcome to contact us for compensation.
    Helpful?
    0 0
    Kindle Customer
    January 22, 2018
    As far as I know it was what they wanted and are satisfied with Gave as a gift
    Gave as a gift. As far as I know it was what they wanted and are satisfied with Gave as a gift. As far as I know the receiver liked the product.
    Reply from HMmagnets:
    Hi Phillip, thank you for your comment, but it seems you gave us 3/5 star rating by mistake.
    We hope it is not their real experience with the knife bar :)
    Helpful?
    0 0
    Mitchell J. Fleischer
    September 26, 2017
    Mounting challenges
    Mounting hardware needs to be adapted for backsplash.
    Reply from HMmagnets:
    Hi Mitchell,

    We are sorry that our mounting hardware does not meet your expectations and we apologize for any inconvenience that this may have caused you.

    As a clarification – our mounting hardware will definitely work for backsplash mounting as well. As soon as we saw your feedback we tried to contact you, to better understand the issue and to help you resolve it, because we believe it's just a small misunderstanding, and we are positive we can help you.

    Included in our package, you should find step by step mounting instructions, plus the following hardware.
    *2 screws (4.5 X 40mm)
    *2 screw anchors (6 X 30mm)
    *2 extra screws and screw anchors
    *1 Stencil to mark the mounting holes

    Different customers want to install the knife bar on different types of surfaces. The five most common ones in a standard house are cement block, backsplash/ceramic, concrete, drywall and wood. Our hardware can be used for mounting on ANY of the surfaces mentioned above and we have tested it many times before.

    Mounting the bar to a backsplash surface is only different in the drilling technique and equipment the customer will need for drilling the holes, but you can definitely use our mounting hardware.

    For instance, drilling properly on a tile backsplash will require some important guidelines:
    1. Use a diamond-tipped drill bit and not a regular one.
    2. Before starting the drilling, it is recommended to cover the portion of the tile where you will be drilling with duct tape.
    3. During the drilling, do not apply pressure to the back of the drill. This could cause the bit to wander and damage the tile. You should also dip the drill bit in water/cutting fluid every few seconds for three to four seconds or until cool to the touch to let it cool down.

    After you finish drilling the holes, install the screw anchors into the holes. If the holes are too narrow, you can use a wider bit drill. To flush the anchors with the wall you can use a utility knife.

    If you want to avoid drilling at all, you can also consider mounting it with a strong double sided tape on the entire backside of the bar.

    Hope this helps!
    HMmagnets
    Helpful?
    0 0
Add a review

Your email address will not be published. Required fields are marked *


Here’s What You’ll Receive:

  • 1 Stainless steel 17″ magnetic bar (Dimensions are 17 x 1.88 x 0.66″)
  • 1 Stencil (For wall installation )
  • 2 Screws (4.5 X 40 mm) + spare set
  • 2 Screw anchors (6 X 30 mm) + spare set
  • Detailed instructions

Click to view the product instructions here.

The bar is made of stainless steel, iron and ferrite magnets.

The package includes a magnetic knife holder, instructions, 4 screws + 4 anchors and a mounting stencil.

Clean the bar with a damp cloth and then make sure to dry it off. Clean as often as you need.

We use a higher quality stainless steel (type 304) than others (type 201). The 304 type has a higher corrosion resistance.
Make sure you dry off your knives before placing them on the bar. If you see rust spots, use water and baking soda to clean them off.

Yes. You have 2 options:

  1. Use the double-sided fridge applicable knife holder and simply place it on the side of your fridge.
  2. Use strong double-sided tape. Make sure you place vertical strips on the entire back side of your bar (less recommended method).

2.88 pounds (1.31KG)

The distance between the center of both holes is 30cm (11.81")

6mm drill bit. We recommend starting with a 5mm one and work your way up.

5-9  knives, depending on the size of your knives.

Inches - 17 (L) x 1.88 (W) x 0.66 (H)
Centimeters - 43.18 (L) x 4.77 (W) x 1.67 (H)

Additional information

Weight 2.88 lbs
Dimensions 17 × 1.88 × 0.66 in
Material

Stainless steel type 304

Category

Magnetic knife holders

Notes

This bar is not magnetized on the back; it is designed for wall-mounting use only. It cannot be magnetized to a refrigerator or other metal surface. Magnets may interfere with the operation of pacemakers. Keep a distance of at least 6 inches from the magnet bar.