Sale!

Magnetic Knife Holder for Wall – Stainless Steel – Size 17″

(1358 customer reviews)

$29.95

In stock

LIMITED OFFER!
BUY 2 PRODUCTS → GET 10% OFF
BUY 3 PRODUCTS → GET 12% OFF (Any combination of our store products)

*Our 17″ premium stainless steel magnetic knife holder is for wall mounting. For our fridge knife holder (double-sided version) – Click here!

17 INCH TOP-NOTCH QUALITY STAINLESS STEEL (TYPE 304) – There are many magnetic knife strips out there using type 201. Well, that’s not good enough for our magnetic rack! We insisted on type “304.” This type is much more durable with regards to corrosion, and will last a life time. It may be more expensive, but it’s actually cheaper in the long run, as you won’t have to replace your knife strip every few years. It’s also 1 inch longer than your typical magnetic knife holder.

HEAVY-DUTY MAGNETS WITH POWERFUL MAGNETIC PULL FORCE – Our magnetic knife holder is *NEW & UPGRADED* with *HEAVY-DUTY MAGNETS* which last a lifetime! The entire bar is magnetized (from edge to edge) allowing for an even flow of magnetic power that will hold all your knives securely. You need not worry though, with just a gentle pull, your knife of choice will be released! *NOTE THAT IT IS NOT MAGNETIZED ON THE BACK, AND DOES NOT ATTACH TO THE FRIDGE*

KEEPS ANY TYPE OF KNIFE SECURE – No matter what type of knife you have, from Chef’s knives to Butcher’s knives, Bread knives and Paring knives, this professional magnetic strip is designed to hold the lightest of knives to the heaviest off knives with ease!

ALLOWS FOR MORE COUNTER SPACE & ORGANIZED DRAWERS! – Get rid of bulky knife blocks that take up way too much space on your kitchen counter, and eliminate the hassle of spending too much time finding the correct knife in unorganized drawers. The HMmagnets magnetic knife strip helps cut cooking preparation in half because whatever you need, you can just grab. It also allows for a much safer kitchen!

MODERN & ELEGANTLY DESIGNED – Our 17-inch magnetic knife bar is elegantly designed in a way that doesn’t expose mounting screws or magnets. It is designed to give a “floating” appearance and is silver in color to fit into *ANY KITCHEN*. It gives a touch of elegance to any home, and *INSTALLATION IS SIMPLE AND FAST*, allowing for knife storage that is, and appears, organized and stylish!

Other versions available:

1. 17″ fridge applicable stainless steel magnetic knife holder (double-sided for fridge)
2. 10″ stainless steel magnetic knife holder (for wall)
3. 24″ stainless steel magnetic knife holder (for wall)

SKU: BE-C8BE-ZZEW Category:

1358 reviews for Magnetic Knife Holder for Wall – Stainless Steel – Size 17″

    sandra w.
    September 16, 2021
    Looks good until it falls
    Sturdy, slick but too heavy for Monster tape application. I didn't want to drill holes in tile so this did not work for me.
    Helpful?
    0 0
    Patsy Walker
    January 8, 2021
    Good quality
    When I received my first bar, I notice that it had 2 scratches on the 1 end of the bar tried to rub them out of the stainless steel but it was a no go...More
    When I received my first bar, I notice that it had 2 scratches on the 1 end of the bar tried to rub them out of the stainless steel but it was a no go, so I thought I had pay too much money for that bar to have to hide the big scratches with other knives so I send it back immediately, got another one 1terday, it had the same scratch on The same scratch on it as the last bar, only there was only 1 scratch . Not dealing with another refund or return, I'm keeping this 1 but not a happy returning customer , and I am not a good reference towards this company, asked it's gonna be a no go from me!!!!
    Helpful?
    0 0
    brandi
    June 15, 2020
    save your money
    Sadly came damaged and the replacement too. Had to go with another brand. Ultimately didn't see anything better about this one than the cheaper versio...More
    Sadly came damaged and the replacement too. Had to go with another brand. Ultimately didn't see anything better about this one than the cheaper version
    Reply from HM Magnets:
    Hi Brandi,

    We're very sorry to hear about that. Please contact us and we'll take care of it for you.
    It's important to note that our magnet bar is the strongest one on Amazon which is what most people look for. We stand behind our price.

    Thank you,
    HMmagnets
    Helpful?
    0 0
    Avid Reader
    May 28, 2020
    Danger! Very sharp edges.
    Be very careful if you buy this product. The edges on the back are extremely sharp and dangerous. One could very easily cut themselves when handling o...More
    Be very careful if you buy this product. The edges on the back are extremely sharp and dangerous. One could very easily cut themselves when handling or installing this item. The block is pretty much as advertised, but I cannot recommend it due to the unfinished edges on it.
    Helpful?
    0 0
    cruz
    May 3, 2020
    Magnets not strong enough
    Magnet not strong enough. I had to place knives at an angle.
    Helpful?
    0 0
    Pam
    March 1, 2020
    Difficult
    Hard to hang on wall, anchors pulled out of wall, returning product
    Helpful?
    0 0
    Magnetic Knife Holder for Wall - Stainless Steel - Size 17" photo review
    Magnetic Knife Holder for Wall - Stainless Steel - Size 17" photo review
    Magnetic Knife Holder for Wall - Stainless Steel - Size 17" photo review
    Magnetic Knife Holder for Wall - Stainless Steel - Size 17" photo review
    +2
    Blue_Steel_Look
    February 10, 2020
    Item was scratched upon arrival, sharp edges, not worth the Price. Returned.
    I bought this to hang on the side my Stainless Steel Refrigerator to save counter space. Pulling it right out of the box, the sharp back edges of the...More
    I bought this to hang on the side my Stainless Steel Refrigerator to save counter space. Pulling it right out of the box, the sharp back edges of the Holder cut my finger. Hence the warning they have on the side of the box, which I find ridiculous. It doesn't take much to machine/file down the edges smooth so its not a cutting hazard. Also, the front of the steel was full of scratches, looks like it already been used and repackaged. In addition, the Holder is very heavy. When I hung it on the side of my Fridge (I took off the back as instructed) it just slid down and because of the unmachined sharp edges, scratched my shiny stainless Fridge. Not at all happy with this Product. Better quality and cheaper ones are available on Webstaurant for like $15. Can't believe all the outstanding reviews.
    Reply from HM Magnets:
    Hello,

    I'm sorry to hear you had a bad experience with your magnetic knife holder!
    I'm not sure what happened, but looking at the pictures you bought the wrong product.
    We also never said to take off the back plate!
    The outstanding reviews are simply because we have the best knife holder, but sometimes there are mistakes and confusions which is why we also have the best customer service - we always reply within 24 hours.
    Please contact us and we'll sort this our for you: info@hmmagnets.com
    Helpful?
    0 0
    Jason Rose
    January 20, 2020
    Horrible install method of an otherwise descent magnet.
    I should have bought a different bar. The installation method of this is ridiculous and cheap. I should have purchased a two-piece bar instead. Needin...More
    I should have bought a different bar. The installation method of this is ridiculous and cheap. I should have purchased a two-piece bar instead. Needing to hang an entire assembly like this one is an irresponsible design.
    Reply from HM Magnets:
    Hello Jason,

    We're sorry to hear you had a hard time installing the knife holder.
    We already contacted you and you received a full refund.
    About the installation process - installing the knife bar is a pretty straightforward process. We provide a step-by-step instructions with all the information needed, screws and anchors (including a spare set just in case) and a template with holes to drill easily without having to measure anything.
    All of the above makes the process simple and should not take more than a few minutes if instructions are followed.
    We understand that it can be confusing sometimes which is why we are always here to assist and we will always reply within 24 hours.

    HMmagnets
    Helpful?
    0 0
    Frost
    November 6, 2019
    Cheap heavy magnets
    Magnets aren't strong...have to put knives/tools upside down...defeating the purpose of magnetic holders.
    Reply from HM Magnets:
    We're sorry to hear that. It is a fact that our magnetic knife holder is the most powerful one on Amazon and can easily hold any type of knife. This was tested many times and was verified by thousands of customers.
    Please contact us as soon as possible and we will sort this out to your satisfaction - we will be more than happy to help you :)
    info@hmmagnets.com
    Helpful?
    0 0
    Amazon Customer
    July 28, 2019
    Will not stay up with gorilla tape
    Looked great for a few days then came crashing down. I used the heaviest gorilla tape available. Tried it again with more gorilla tape and the same th...More
    Looked great for a few days then came crashing down. I used the heaviest gorilla tape available. Tried it again with more gorilla tape and the same thing happened. Don't want to drill into my cabinets so I guess this was a wasted purchase.
    Reply from HM Magnets:
    Hello,

    We're sorry to hear the gorilla tape did not work for you.
    A few notes:
    1) HMmagnets never claimed that double sided tapes would work. We have always recommended to mount the bar by Drilling into your wall.
    2) Many customers actually reported that Gorilla tape and other double sided tapes worked perfectly fine for them. We always made sure to explain that every surface reacts differently - some work better and some less.
    3) Amazon has a 30-day refund period, so you can request a refund so that your purchase won't be wasted :)

    Thank you,
    HMmagnets
    Helpful?
    0 0
    Nina B
    June 5, 2018
    Magnet bar moves when removing a knife.
    This is a nice, strong magnetic bar, but it rocks when removing a knife. The screw heads keep the bar slightly away from the wall so it can not be in...More
    This is a nice, strong magnetic bar, but it rocks when removing a knife. The screw heads keep the bar slightly away from the wall so it can not be installed solidly flush. I hesitate to glue it to the wall as others have suggested because removing it from drywall would destroy the wall surface if one ever wanted to relocate it.
    Reply from HM Magnets:
    Hi Nina,
    It's important to note that the bar rocks only in one case which is when not installed it properly.
    What you should do is make sure the anchors are all the way in, so they are flushed. You can achieve that by tapping on them using a hammer or by cutting them slightly (in case they pop out too much).
    Then you install the screws so that only the heads are out (as seen in the instructions). If the screws are not installed properly then the bar will rock.
    Hope this helps!
    Helpful?
    0 0
    Loraine Sinclair
    December 4, 2017
    Two Stars
    have to hang the knives upside down or they slip off
    Reply from HM Magnets:
    Hi Loraine,

    We are sorry the product did not meet your expectations.
    We are not sure which knives you have used but there are hundreds of other customers who were very happy with the strong magnets.
    Also, we tested many knives on our magnetic knife bar. For example:
    Chef's knife – we tested a 0.7lb, 9'' knife and then added extra weight, making it 1.4lbs – the magnet bar held it without any problems
    Cleaver – we tested a 1.2lb, 7'' knife and added extra weight, making it 3lbs - the magnet bar held it without any problems.
    It's important to mention that other magnetic knife bars failed to hold such knives when we tested them.

    We wish you the best of luck :)
    Helpful?
    1 0
Add a review

Your email address will not be published. Required fields are marked *


Here’s What You’ll Receive:

  • 1 Stainless steel 17″ magnetic bar (Dimensions are 17 x 1.88 x 0.66″)
  • 1 Stencil (For wall installation )
  • 2 Screws (4.5 X 40 mm) + spare set
  • 2 Screw anchors (6 X 30 mm) + spare set
  • Detailed instructions

Click to view the product instructions here.

The bar is made of stainless steel, iron and ferrite magnets.

The package includes a magnetic knife holder, instructions, 4 screws + 4 anchors and a mounting stencil.

Clean the bar with a damp cloth and then make sure to dry it off. Clean as often as you need.

We use a higher quality stainless steel (type 304) than others (type 201). The 304 type has a higher corrosion resistance.
Make sure you dry off your knives before placing them on the bar. If you see rust spots, use water and baking soda to clean them off.

Yes. You have 2 options:

  1. Use the double-sided fridge applicable knife holder and simply place it on the side of your fridge.
  2. Use strong double-sided tape. Make sure you place vertical strips on the entire back side of your bar (less recommended method).

2.88 pounds (1.31KG)

The distance between the center of both holes is 30cm (11.81")

6mm drill bit. We recommend starting with a 5mm one and work your way up.

5-9  knives, depending on the size of your knives.

Inches - 17 (L) x 1.88 (W) x 0.66 (H)
Centimeters - 43.18 (L) x 4.77 (W) x 1.67 (H)

Additional information

Weight 2.88 lbs
Dimensions 17 × 1.88 × 0.66 in
Material

Stainless steel type 304

Category

Magnetic knife holders

Notes

This bar is not magnetized on the back; it is designed for wall-mounting use only. It cannot be magnetized to a refrigerator or other metal surface. Magnets may interfere with the operation of pacemakers. Keep a distance of at least 6 inches from the magnet bar.