Sale!

Magnetic Knife Holder for Wall – Walnut Wood – Size 16″

(67 customer reviews)

$44.95

LIMITED OFFER!
BUY 2 PRODUCTS → GET 10% OFF
BUY 3 PRODUCTS → GET 12% OFF (Any combination of our Amazon.com store products. Use code: HMWEB2022)

☑️📏 MORE KNIFE HOLDERS & SIZES AVAILABLE – Our knife holders come in 3 different types: Wall (drill), Wall Adhesive (no-drill) and Fridge Applicable (double-sided) versions. Sizes vary from 10” to 24” – all are available in our knife holders page.

SKU: B2-V22L-FLIW Category:

67 reviews for Magnetic Knife Holder for Wall – Walnut Wood – Size 16″

    Researcher
    November 7, 2022
    Great magnets ... meh finish
    I had to roll with a solid 4-star on this one. It's fine. It works.Pros+ Strong magnets that hold kitchen shears and large knives+ Straightforward ins...More
    I had to roll with a solid 4-star on this one. It's fine. It works.Pros+ Strong magnets that hold kitchen shears and large knives+ Straightforward installation+ No defects in functionCons- The finish isn't great- It's been a couple of months and it already looks like it needs to be refinishedOverall - I'm happy enough with the purchase but I wouldn't recommend it to a friend or buy it again.
    Helpful?
    0 0
    William
    February 7, 2022
    Strong magnet - Wrong anchor/screw combo.
    The packaging was well done but the anchors were too small for the fat screws. Had to run to the Hardware store and get the right sized anchor.From th...More
    The packaging was well done but the anchors were too small for the fat screws. Had to run to the Hardware store and get the right sized anchor.From there on the mounting experience was quick and simple. The magnets are very strong..
    Helpful?
    0 0
    Magnetic Knife Holder for Wall - Walnut Wood - Size 16" photo review
    CinoraCinora
    December 31, 2021
    Tricky hang but great once it is up
    It came with a template to hang so you don't have to figure it out which is great, but if you don't have it stretched out perfectly it will be off by ...More
    It came with a template to hang so you don't have to figure it out which is great, but if you don't have it stretched out perfectly it will be off by a hair. Sort of a big deal when you're going through tile which may have been our problem since the tile doesn't allow anything to lay flat. We got it up though and now that its there - we love it. Fits all our knives and feels nice and solid. Love the color.
    Helpful?
    0 0
    Magnetic Knife Holder for Wall - Walnut Wood - Size 16" photo review
    jinny Mertz
    September 1, 2021
    Everything worked wonderfully
    -
    Helpful?
    0 0
    Hanbert
    August 18, 2021
    Looks nice. Am slightly concerned about stability.
    The magnetic bar came with a cardboard guide for installing the screws and is nice overall. The one struggle I had was making sure it was tight enough...More
    The magnetic bar came with a cardboard guide for installing the screws and is nice overall. The one struggle I had was making sure it was tight enough that the entire bar didn't wiggle when removing a knife. It's tricky, but doable. Hopefully everything will remain solid and I won't take the whole bar off the wall when I remove a knife.
    Helpful?
    0 0
    Larry
    June 26, 2021
    Needs Finishing Work
    Great idea, installed easy although the hardware could be better. It scratches way to easy for an item that's meant to have knives and scissors placed...More
    Great idea, installed easy although the hardware could be better. It scratches way to easy for an item that's meant to have knives and scissors placed on and off frequently. Scratched 1st time we removed kitchen scissors... Expected more for the price
    Helpful?
    1 0
    Eric D. Reeves
    May 21, 2021
    Strong magnet, poor tape.
    I'm really impressed with the magnet and aesthetic in my kitchen. Only problem was that the double-sided tape that was provided failed after a short ...More
    I'm really impressed with the magnet and aesthetic in my kitchen. Only problem was that the double-sided tape that was provided failed after a short time. I ended up using gorilla tape, but was a little disappointed since I only have three knives on there and it's mounted on subway tile, which should give it plenty of clean surface to adhere to. Other than that, it looks great and does it's job.
    Helpful?
    1 0
    Johnny Freeman
    May 9, 2021
    It works Great
    Easy to install and the color
    Helpful?
    0 0
    ARG
    December 22, 2020
    Solid, finished wood.
    works well, sturdy, magnets completely enclosed and cannot be lost. It's finished which I like less but some will love more. I most prefer my unfinish...More
    works well, sturdy, magnets completely enclosed and cannot be lost. It's finished which I like less but some will love more. I most prefer my unfinished walnut knife blocks from koruto out went with this one because they didn't offer it in this length. Very happy with it.
    Helpful?
    0 0
    Magnetic Knife Holder for Wall - Walnut Wood - Size 16" photo review
    Ryan
    December 7, 2020
    Holds knives well
    Recently got a new knife set and wanted to take better care of them.Instead of having a knife block we got one of these so they can air out and I thin...More
    Recently got a new knife set and wanted to take better care of them.Instead of having a knife block we got one of these so they can air out and I think it looks nicer.It also saves us room on our counter top.Install was pretty easy once we got everything aligned.It fits and holds our 6 knife set perfect.Not sure if it would hold more, but it’s great for our use and definitely recommend!
    Helpful?
    1 0
    Magnetic Knife Holder for Wall - Walnut Wood - Size 16" photo review
    Michael wiencek
    November 21, 2020
    Good buy
    Works well , the magnets are strong holds those heavy handled German knives.
    Helpful?
    0 0
Add a review

Your email address will not be published. Required fields are marked *

Description

☑️🧲 16 INCH WALNUT KNIFE HOLDER WITH SUPER-STRONG NEODYMIUM MAGNETS – HMmagnets brings you a *NEW & UPGRADED* 16-inch walnut wood knife holder, which includes *HEAVY-DUTY MAGNETS* that will always keep their magnetic power. This new upgraded version allows for a powerful magnetic force, evenly distributed along the entire 16 inches that will hold all your knives securely in place, yet will easy allow release with only a gentle tug.

☑️🔪 SECURE ALL DIFFERENT TYPES OF KNIVES – This magnetic knife bar will *HOLD ANY TYPE OF KNIFE* heavy or light. Knives will be held on tight without ever slipping. No matter what knives you may have, from Butcher’s and Chef knives, to Bread, Paring and Utility knives, this magnetic knife bar will hold all in place.

☑️ EARTHY & RUSTIC DESIGN – HMmagnets 16-inch wooden magnetic knife strip is designed from high-quality walnut hardwood that gives off an earthy and rustic appearance, perfect if your décor leans on that sort of design, and uses a lot of wood tones and earthy colors. It still maintains an elegant and modern design, and appears to *FLOAT WHERE INSTALLED*. This is appliance storage that becomes part of the décor, where all installation screws and magnets are hidden.

☑️ SIMPLER INSTALLATION – Thanks to heavy-duty neodymium magnets, our dark walnut knife strip is lighter than other knife strips, making it easier to install. It will look as if it is floating, and includes a special stencil, that’s purpose is for marking holes. NOTE: The magnetic force only applies to one side as this knife bar is not meant for fridge application.

☑️ KEEP YOUR KITCHEN CLUTTER FREE – Knife blocks on counters that don’t have much space, and knives spread around in drawers create a cluttered environment in your kitchen that makes for unpleasant surroundings while cooking. You need to be able to access an array of knives during cooking, and often don’t have time to look around for the ideal knife. When you have your knives organized on our dark walnut magnetic holder, cooking becomes fuss-free and less hazardous!

☑️ Other versions available:

Here’s What You’ll Receive:

  • 16″ Walnut wood magnetic bar (Dimensions are 16 x 2 x 0.94″)
  • 1 Stencil (For wall installation )
  • 2 Screws (4 X 40 mm) + spare set
  • 2 Screw anchors (5 X 30 mm) + spare set
  • Detailed instructions

Click to view the product instructions here.

No. As long as you use it correctly, a magnetic knife holder will not damage your knives. Simply make sure that when you remove a knife that you don't apply pressure on the blade.

The package includes one wood magnetic knife holder, instructions, a mounting stencil, 4 screws and 4 anchors.

No. The magnet bar will never lose its magnetic pull force under normal conditions.

Clean the bar with a damp cloth and then make sure to dry it off. Clean as often as you need.

You can place your magnetic knife holder in many places:

  • On your kitchen wall/tiles.
  • Above the stove
  • On the side of your cabinet

Yes. You can hang a magnetic knife holder vertically. However, if you are placing heavy things on it, such as knives, it is recommended to mount it horizontally for safety reasons.

Mount your knife holder by drilling:

  1. Use a stencil to mark the holes.
  2. Drill 2 holes. Start with one hole first and then the second one. This will ensure they are marked properly.
  3. Insert the anchors and screws (make sure only the screw head is out).
  4. Place the bar over the screws.

Yes. Use strong double-sided tape. Make sure you place vertical strips on the entire back side of your bar (this is the less recommended method).

The distance between the center of both holes is 13" (33CM)

5mm drill bit. We recommend starting with a 4mm one and work your way up.

5-9 knives depending on the size of your knives.

Inches - 16 (L) x 2 (W) x 0.94 (H)
Centimeters - 40.6 (L) x 5.1 (W) x 2.4 (H)

If they have enough surface area in contact with the bar, then the answer is yes.

While it might hold them, it is not recommended. You should use a magnetic tool holder specifically designed to hold heavy tools.

No. The only version we offer that sticks to a fridge is made of stainless steel and not wood.

Yes. It is made of walnut wood.

Additional information

Weight 1.10 lbs
Dimensions 16 × 2 × 0.94 in
Material

Walnut Wood

Category

Magnetic knife holders

Notes

This bar is not magnetized on the back; it is designed for wall-mounting use only. It cannot be magnetized to a refrigerator or other metal surface. Magnets may interfere with the operation of pacemakers. Keep a distance of at least 6 inches from the magnet bar.