Magnetic Knife Holder for Wall – Walnut Wood – Size 10″

(7 customer reviews)


BUY 3 PRODUCTS → GET 12% OFF (Any combination of our store products. Use code: HMWEB2022)

☑️📏 MORE KNIFE HOLDERS & SIZES AVAILABLE – Our knife holders come in 3 different types: Wall (drill), Wall Adhesive (no-drill) and Fridge Applicable (double-sided) versions. Sizes vary from 10” to 24” – all are available in our knife holders page.


7 reviews for Magnetic Knife Holder for Wall – Walnut Wood – Size 10″

There are no reviews yet.

Be the first to review “Magnetic Knife Holder for Wall – Walnut Wood – Size 10″”

Your email address will not be published. Required fields are marked *


☑️🧲 10 INCH (SMALL SIZE) WALNUT KNIFE HOLDER WITH SUPER-STRONG NEODYMIUM MAGNETS – HMmagnets brings you a *NEW & UPGRADED* 10-inch walnut wood knife holder, which includes *HEAVY-DUTY MAGNETS* that will always keep their magnetic power. This new upgraded version allows for a powerful magnetic force, evenly distributed along the entire 10 inches that will hold all your knives securely in place, yet will easy allow release with only a gentle tug.

☑️🔪 SECURE ALL DIFFERENT TYPES OF KNIVES – This magnetic knife bar will *HOLD ANY TYPE OF KNIFE* heavy or light. Knives will be held on tight without ever slipping. No matter what knives you may have, from Butcher’s and Chef knives, to Bread, Paring and Utility knives, this magnetic knife bar will hold all in place.

☑️ EARTHY & RUSTIC DESIGN – HMmagnets 10-inch wooden magnetic knife strip is designed from high-quality walnut hardwood that gives off an earthy and rustic appearance, perfect if your décor leans on that sort of design, and uses a lot of wood tones and earthy colors. It still maintains an elegant and modern design, and appears to *FLOAT WHERE INSTALLED*. This is appliance storage that becomes part of the décor, where all installation screws and magnets are hidden.

☑️ SIMPLER INSTALLATION – Thanks to heavy-duty neodymium magnets, our dark walnut knife strip is lighter than other knife strips, making it easier to install. It will look as if it is floating, and includes a special stencil, that’s purpose is for marking holes. NOTE: The magnetic force only applies to one side as this knife bar is not meant for fridge application.

☑️ KEEP YOUR KITCHEN CLUTTER FREE – Knife blocks on counters that don’t have much space, and knives spread around in drawers create a cluttered environment in your kitchen that makes for unpleasant surroundings while cooking. You need to be able to access an array of knives during cooking, and often don’t have time to look around for the ideal knife. When you have your knives organized on our dark walnut magnetic holder, cooking becomes fuss-free and less hazardous!

☑️ Other versions available:

Here’s What You’ll Receive:

  • 10″ Walnut wood magnetic bar (Dimensions are 10 x 2 x 0.94″)
  • 1 Stencil (For wall installation )
  • 2 Screws (4 X 40 mm) + spare set
  • 2 Screw anchors (5 X 30 mm) + spare set
  • Detailed instructions

Click to view the product instructions here.

No. As long as you use it correctly, a magnetic knife holder will not damage your knives. Simply make sure that when you remove a knife that you don't apply pressure on the blade.

The package includes one wood magnetic knife holder, instructions, a mounting stencil, 4 screws and 4 anchors.

No. The magnet bar will never lose its magnetic pull force under normal conditions.

Clean the bar with a damp cloth and then make sure to dry it off. Clean as often as you need.

You can place your magnetic knife holder in many places:

  • On your kitchen wall/tiles.
  • Above the stove
  • On the side of your cabinet

Yes. You can hang a magnetic knife holder vertically. However, if you are placing heavy things on it, such as knives, it is recommended to mount it horizontally for safety reasons.

Mount your knife holder by drilling:

  1. Use a stencil to mark the holes.
  2. Drill 2 holes. Start with one hole first and then the second one. This will ensure they are marked properly.
  3. Insert the anchors and screws (make sure only the screw head is out).
  4. Place the bar over the screws.

Yes. Use strong double-sided tape. Make sure you place vertical strips on the entire back side of your bar (this is the less recommended method).

The distance between the center of both holes is 8" (20.3CM)

0.82 pounds (0.375 KG)

5mm drill bit. We recommend starting with a 4mm one and work your way up.

4-7 knives depending on the size of your knives.

Inches - 10 (L) x 2 (W) x 0.94 (H)
Centimeters - 25.4 (L) x 5.1 (W) x 2.4 (H)

If they have enough surface area in contact with the bar, then the answer is yes.

While it might hold them, it is not recommended. You should use a magnetic tool holder specifically designed to hold heavy tools.

No. The only version we offer that sticks to a fridge is made of stainless steel and not wood.

Yes. It is made of walnut wood.

Additional information

Weight 0.82 lbs
Dimensions 10 × 2 × 0.94 in

Walnut Wood


Magnetic knife holders


This bar is not magnetized on the back; it is designed for wall-mounting use only. It cannot be magnetized to a refrigerator or other metal surface. Magnets may interfere with the operation of pacemakers. Keep a distance of at least 6 inches from the magnet bar.