Sale!

10″ Knife Holder (One-Sided for Wall)

(153 customer reviews)

$34.95 $24.95

Premium 10 Inch (Small Size) Stainless Steel Magnetic Knife Holder – Professional Magnetic Knife Strip – Space-Saving Knife Rack/Knife Bar With Powerful Magnetic Pull Force (Upgraded Version)

Other versions available:

  1. 17″ stainless steel magnetic knife holder (one-sided)
  2. 17″ fridge applicable stainless steel magnetic knife holder (double-sided)
  3. 24″ stainless steel magnetic knife holder

In stock

LIMITED OFFER!
BUY 2 PRODUCTS → GET 10% OFF (Any combination of our store products)
SKU: 3Z-7D3Y-3GI8 Category:

Here’s What You’ll Receive:

  • 1 Stainless steel 10″ magnetic bar (Dimensions are 10 x 1.88 x 0.66″)
  • 1 Stencil (For wall installation )
  • 2 Screws (4.5 X 40 mm) + spare set
  • 2 Screw anchors (6 X 30 mm) + spare set
  • Detailed instructions

Click to view the product instructions here.

The bar is made of stainless steel, iron and ferrite magnets.

The package includes a magnetic knife holder, instructions, 4 screws + 4 anchors and a mounting stencil.

Clean the bar with a damp cloth and then make sure to dry it off. Clean as often as you need.

We use a higher quality stainless steel (type 304) than others (type 201). The 304 type has a higher corrosion resistance.
Make sure you dry off your knives before placing them on the bar. If you see rust spots, use water and baking soda to clean them off.

The bar is an all-in-one piece and should not be separated.

Yes. You have 2 options:

  1. Use the double-sided fridge applicable knife holder and simply place it on the side of your fridge.
  2. Use strong double-sided tape. Make sure you place vertical strips on the entire back side of your bar (less recommended method).

1.63 pounds (0.74KG)

The distance between the center of both holes is 8 inches (20.23 cm).

6mm drill bit. We recommend starting with a 5mm one and work your way up.

4-7  knives, depending on the size of your knives.

Inches - 10 (L) x 1.88 (W) x 0.66 (H)
Centimeters – 25.4 (L) x 4.77 (W) x 1.67 (H)

Additional information

Weight 1.63 lbs
Dimensions 10 × 1.88 × 0.66 in
Material

Stainless steel type 304

Category

Magnetic knife holders

Notes

This bar is not magnetized on the back; it is designed for wall-mounting use only. It cannot be magnetized to a refrigerator or other metal surface. Magnets may interfere with the operation of pacemakers. Keep a distance of at least 6 inches from the magnet bar.

153 reviews for 10″ Knife Holder (One-Sided for Wall)

    Olivia Martin
    December 9, 2019
    Great product
    Easy to install, feels very secure, and helps free up much needed counter space.
    Helpful?
    0 0
    D. Jones
    December 8, 2019
    Great looking and very strong
    I wanted a long one (we have lots of knives), so I ordered two of these and placed them end to end on our tile wall. I didn't want to destroy our nice...More
    I wanted a long one (we have lots of knives), so I ordered two of these and placed them end to end on our tile wall. I didn't want to destroy our nice tile backsplash with nails or screws, so we used Command strips to hold it in place. Our tile is textured, so it was not a super flat surface, but it has done the job so far, which has been about 2 and a half months. My husband said one time when he took the largest butcher knife off, the mechanism came off the wall, but he stuck it back on and it has been good ever since. It is attractive too. I definitely recommend it!
    Helpful?
    1 0
    Sarah
    December 7, 2019
    It’s very nice!
    I loved this! Looks great and it is a strong magnetic holder!
    Helpful?
    0 0
Add a review

Your email address will not be published. Required fields are marked *